TiVo SDOC-00091-002 manual Remote Control Settings, Programmable Buttons

5 Settings

Due to the great variety of TVs and A/V receivers available, some makes

and models may not be compatible with your TiVo remote control.

If you’re unable to program the TiVo remote to work with your equipment, trythe “learning” function on page 55, or try our online suppot for remote controls. Search for “Code Search” at www.tivo.com/ support. The article about performing a code search may help you find a compatible remote code.

Remote Control Settings

From the TiVo Central® screen, select Messages & Settings, then Settings, Remote & Devices, then Remote Control.

Programmable Buttons

Some buttons on the TiVo remote are programmable; see the inside front cover of this guide for details. To program the buttons:

1.Follow the instructions on the Remote Control Setup screen. You have options to control power, volume and mute on your TV, volume and mute on your A/V receiver (stereo system), and input selection on your TV.

2.Press and hold the buttons indicated on the screen for about 5 seconds—until the red light at the end of the remote lights up and stays on.

3.Try entering the first code listed on the screen. The red light on the remote flashes to indicate it received the code. Test the button. If it doesn’t work, repeat the steps using the next code on the list.

Resetting the Programmable Buttons

You can reset all the programmable buttons (TV PWR, VOLUME, MUTE, INPUT, and the DVR SWITCH) at once. All the remote's buttons will return to the unprogrammed state of a new remote. To reset the buttons:

1.Point the remote away from your DVR.

2.Press and hold the TV PWR and TiVo buttons simultaneously until the red light at the end of the remote lights, and remains lit when you release the buttons.

3.Press THUMBS DOWN three times, then press ENTER.

52