TiVo SDOC-00091-002 manual Learning Remote

Settings 5

Learning Remote

The TiVo® Series3TM Digital Media Recorder remote is a “learning remote.” This means that it can learn certain functions from other remotes. If you were unable to find a code that works using the programming procedure on page 52, try this method:

1.Press the TiVo button and SELECT buttons simultaneously, and hold them for 3 seconds, until the red activity light remains lit. The remote is now in “learning mode.”

2.On the TiVo remote, press and release the button you want it to learn (e.g., TV PWR). The activity light will flash once to acknowledge the button press, then remain lit.

3.Point the remotes directly at each other, no more than 4 inches apart.

4.Press the corresponding button on the TV or A/V receiver remote (e.g., Power).

4” max.

TV or A/V receiver remote TiVo DVR remote

If learning is successful, the activity light will flash 4 times. If it is not successful, it will blink 10 times very quickly.

5.Repeat steps 2-5 for any additional buttons. NOTE: In learning mode, VOL UP and VOL DOWN are separate buttons.

6.When done, press the TiVo button to exit learning mode and return the remote to normal operation.

55