Hitachi 55HDT52 important safety instructions Vcr

Connecting External Video Sources

Your Hitachi Plasma Television is equipped with an AV Network feature. This feature helps to control your external Audio/Video equipment (VCR, Set Top Box, DVD, etc.). Once this is setup, it allows your IR Mouse connector to control your equipment using your Hitachi Plasma TV Remote Control. You can use your HITACHI remote control to control the Audio/Video equipment command without the equipment’s remote control.

The Plasma Television Rear Panel has 2 IR BLASTER jacks. Each IR Mouse cable can connect up to 2 external Audio/Video components. Therefore, you can connect the Plasma Television with up to four components. Please see the following example of an AV Network setup between your Hitachi Plasma Television and external Audio/Video equipment (VCR and DVD Player).

CONNECTING EXTERNAL AUDIO/VIDEO COMPONENTS TO IR BLASTER FOR AV NETWORK

1.Connect your external Audio/Video components to the Rear Panel shown below.

2.Connect the IR Mouse cable to the IR BLASTER output of the Rear Panel.

3.Place the IR Mouse in front of the infrared sensor of the external components you wish to control.

/

G-LINK

			OUTPUT
		Y	PB/CB PR/CR R	L
V	L	R
OUTPUT
Infrared		Infrared
		Sensor
Sensor			DVD Player
VCR
IR
Mouse

First time use

4.ACCESS THE AV NET SETUP WIZARD Press the MENU button.

5.	Use the CURSOR PAD	or channel scroll down
	to highlight SETUP.
6.	Press the SELECT or CURSOR PAD button to
	select.
7.	Use the CURSOR PAD	or channel scroll to
	highlight the SET AV NET features then press the
	SELECT button.

8.Follow the Setup procedure on pages 79-86.

Video

Audio

TV Guide On Screen

Channel Manager

Locks

Timers

Setup

Power Swivel

Move SEL Select

Setup

Menu Preference

Screen Saver

Set The Inputs

Set AV NET

Set Closed Captions

Set Monitor Out

Upgrades

Quick Start Up

Move SEL Return

NOTE: 1. The Rear Panel has two IR BLASTER outputs which can control up to a total of four external components.

2.The IR Mouse must be placed in front of the external components infrared sensor for the AV Network to work. Double-sided mounting tape may be used to hold the IR Mouse in place.

3.The correct codes must be chosen for each of the Audio/Video components for the AV Network to function properly.

21