REAR PANEL JACKS
CableCARD Slot
This slot is for the CableCARD that will be provided by your local cable operator to gain access to chosen cable channels. The CableCARD will allow you to tune digital and high definition cable channels. Please call your local cable operator if this service is available before requesting a CableCARD (also known as Point of Deployment (POD) module).
Connect a coaxial cable to ANT A terminal of the Rear Panel Jacks.
Insert the CableCARD into the slot (Top of card should be facing up as shown).
Digital Cable
Rear Panel of AVC
END
THIS
CableCARD
INSERT
FIRST TIME USE
If the CableCARD is properly installed or not installed, the TV will display the following respective screens.
CableCARD is installed | OR |
|
CableCARD
is not installed
After the CableCARD is installed, wait until the second screen below appears. The third screen below will appear if a channel is not authorized for viewing. Press the EXIT button to exit the second screen.
Acquiring Data.
Please wait.
In order to start cable service for this device, please contact your cable provider
CableCARD(tm):
Host:
Data:
UnitAddress:
Press EXIT to return
Not an Authorized Channel
Please take note of all information on the screen (you will provide this information to your cable operator). Call your cable operator and give them the information from the card to start your cable service.
NOTES: 1. A digital cable subscription is required.
2.Antenna B will not be available when CableCARD is inserted.
3.Do not insert a PCMCIA card into the CableCARD slot.
4.Please see pages
13
