CHANNEL MANAGER
Signal Meter
Select Signal Meter when using an indoor or outdoor antenna. This feature will show the signal strength and peak values of the Antenna signal to help you adjust your antenna to optimize signal reception.
Chan. Manager
Set The Antenna 
Auto Chan. Scan
Signal Meter
Channel List
Move SEL Select
or
Chan. Manager |
| |
Signal Meter |
| |
Channel | : | 3- |
Strength | : | 1 |
Peak | : | 1 |
|
| Close |
Move SEL | Return |
|
Use the CURSOR PADS and the SELECT button to highlight and select “close” to exit.
NOTE: The Signal Meter will not be available (grayed out) when watching analog channels.
Channel List
This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory (SCAN), which are protected by LOCK and which are your Favorite (FAV) Channels.
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Move SEL Select
or
Channel List (Cable) |
|
| |||
| CH# |
| Scan | CH ID | Lock |
FAV | 3 |
| On |
| |
FAV | 4 |
| On |
| |
| 5 |
| On |
| |
| 6 |
| On |
| |
| 7 |
| On |
| |
| 8 |
| On |
| |
| 9 |
| On |
| |
| 10 |
| On |
| |
Move |
| SEL | Return |
|
|
ON-SCREEN DISPLAY
Use the CURSOR PADS to navigate the Channel List.
Press the CURSOR PAD ( or ) to select On or Off on the Scan column.
Press the EXIT button to return to normal viewing.
NOTE: When a CableCARD is installed, the Channel List will be dependent on channels agreed upon by you and your cable operator.
64
