63
ON-SCREEN DISPLAY
CHANNEL MANAGER

Select Channel Manager to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel

List.

NOTE: When a CableCARD is installed, Auto Channel Scan will not be available since channels will be fixed based on what was

agreed upon by you and your cable operator.

This feature will automatically store active Analog and Digital channels in Auto Channel Scan memory.

Ant A
Auto Channel Scan
Start Reset
Ant B
Auto Channel Scan
Start Reset
Move
SEL
Return
Move
SEL
Select
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Chan. Manager
Auto Chan. Scan
or
Move
SEL
Return
Chan. Manager
Set The Antenna
Auto Channel Scan
Signal Meter
Channel List
Locks
Chan. Manager
Aspect
Audio
Video
Move
SEL
Sel.
Timers
Setup
Power Swivel
or

This feature will select Antenna options.

Move
SEL
Select
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Chan. Manager
Set The Antenna
( ) Connect Cable to Ant A and
Air to Ant B
( ) Connect Cable to Ant A only
( ) Connect Air to Ant A only
Cable Source
Cable(1) Cable(2)
Move
SEL
Return
or

Press CURSOR PAD , to highlight function, then press the SELECTbutton or CURSOR PAD to select.

Press CURSOR PAD , to highlight function, then press the SELECTbutton to select.

Press the EXIT button to quit or select SET THE ANTENNAto return to the previous MENU.

Press CURSOR PAD or to highlight Ant A or Ant B.

Press CURSOR PAD orto highlight the Start or Clear option.

Press the SELECT button to start Auto Channel Scan.

Chan.

Manager

Set The Antenna

Auto Channel Scan

NOTE: When a CableCARD is installed, antenna settings will be set automatically to “Connect Cable to Ant Aonly”.