CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO LASERDISC/DVD PLAYER OR HDTV SET TOP BOX TO INPUT 1 OR 2 COMPONENT:
1.Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the AVC Center below.
2.Connect the cable from the PB/CB OUT or
3.Connect the cable from the PR/CR OUT or
4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.
5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.
6.Press the INPUTS button, then select INPUT 1 or 2 from the INPUTS menu to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO label disappears automatically after approximately four seconds.
7.Select ANT A or B to return to the previous channel.
FIRST TIME USE
OUTPUT
L R Y PB PR
HDTV
DVD Player
|
|
| OUTPUT |
|
| ||
OR |
|
| VIDEO |
|
|
| AUDIO |
|
|
|
| ||||
PR/CR PB/CB Y | L | R | |||||
|
|
|
|
|
|
|
|
Back of DVD Player
NOTE: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.
2. See page 27 for tips on REAR PANEL CONNECTIONS.
19
