76
ON-SCREEN DISPLAY
SETUP
Use this feature to give a name to any of the five video inputs.Press CURSOR PAD or to highlight the name of the video inputs. Press the CURSOR PAD to access the RENAME LIST.Use the CURSOR PAD to navigate into the RENAMELIST and choose a name to the video input. Press the SELECT button to select the desired input name.Select RESET to set video names to original factory preset condition.Press EXIT to quit the menu or select SET THE INPUTS to return to the previous menu.NOTE: The video input name will be displayed only when video input is displayed as main picture.NOTE: The AVC and Monitor will go to Stand-By mode (Off) after 45 seconds when no video input signal is detected.Set The Inputs
Move
SEL
Return
Set The Inputs
Setup
Video Power Save
Set Black Side Panel
Set The Inputs
Screen Saver
Menu Preference
Setup
Move
SEL
Return
Set Monitor Out
Set Closed Captions
Move
SEL
Return
Set The Inputs
Setup
Video1
Video2
Video3
Video4
Video5
AVR DVD PVR STB2
CAM DVD2 PVR2 VCR
CBL DVD3 SAT VCR2
CBL2 LD STB VCR3
Reset
Rename List
Video Power Save
Video1
Video2
Video3
Video4
Video5
AVR DVD PVR STB2
CAM DVD2 PVR2 VCR
CBL DVD3 SAT VCR2
CBL2 LD STB VCR3
Reset
Rename List
Video Power Save
Move
SEL
Return
Set The Inputs
Setup
Move
SEL
Return
Set The Inputs
Setup
Video Power Save
Video1
Video2
Video3
Video4
Video5
AVR DVD PVR STB2
CAM DVD2 PVR2 VCR
CBL DVD3 SAT VCR2
CBL2 LD STB VCR3
Reset
Rename List
Video1
Video2
Video3
Video4
Video5
AVR DVD PVR STB2
CAM DVD2 PVR2 VCR
CBL DVD3 SAT VCR2
CBL2 LD STB VCR3
Reset
Rename List
Use this feature to reduce power consumption for video input when there is no video input signal. In RGBmode, this feature will always be on.Video Power SavePress CURSOR PAD to highlight VIDEOPOWER SAVE.Press the SELECT button to select.Press EXIT to quit the menu or select SET THE INPUTS to return to the previous menu.