Audio
Use the functions below if your TV is connected to an amplifier/receiver with OPTICAL DIGITAL INPUT with Dolby Digital or PCM decoder capabilities.
1. | Use the CURSOR PAD | or | to highlight the |
| function to be adjusted. |
|
|
2. | Press the CURSOR PAD | or | to adjust the |
| function. |
|
|
Audio
Treble
Bass
Balance
SRS
BBE
Audio Source
Internal Speakers
Auto Noise Cancel
Perfect Volume
Move SEL Return
50%
50% L
Off
Hard
Stereo
On
Off
Off
R
3.Press EXIT to quit the menu or select AUDIO to return to the main menu.
Audio
BBE
Audio Source
Internal Speakers
Auto Noise Cancel
Perfect Volume
Loudness
Language
Digital Output
DRC
Move SEL Return
Hard
Stereo
On
Off
Off
Off
1[Unknown] Dolby Digital On
Language
Some programs transmit more than one DTV language option. Most will have English as a default language. The language function will allow you to select up to 4 language options (if available).
Digital Output
This function allows you to select between Dolby® Digital and PCM.
Dolby® Digital | Select this feature if the TV is connected to an amplifier/ receiver with a Dolby® Digital only |
| decoder; it will provide six independent soundtrack channels through the optical output |
| jack (Digital Audio). |
PCM | Select this feature if the TV is connected to an amplifier/ receiver with a PCM only |
| decoder; it will provide two independent soundtrack channels through the optical output |
| jack (Digital Audio). |
Manufactured under license from Dolby Laboratories. “Dolby” and the
DRC
Dynamic Range Compression - Use this function to compress the range of sound volume. By compressing the range of sound volume, it is possible not only to suppress the output of loud sound at night but also to raise the volume of low sound. This is only effective when the TV is connected via the optical out (digital audio) to an amplifier/receiver with a Dolby® Digital decoder. The default setting is ON. Use the CURSOR PAD or to select the chosen options.
NOTE: These functions are only available when viewing digital programs.
46
