Hitachi 55VG825 important safety instructions Phillips Head Screw Driver Lamp Compartment

Lamp Replacement

6.Without installing the lamp cover, the power will be off and the Lamp Indicator will flash (see page 9). Be sure to install the lamp cover by re-engaging the two clips and tighten the screws before turning the power on, otherwise it may cause unusual colors.

PHILLIPS HEAD

SCREW DRIVER

LAMP COMPARTMENT

NOTE: If power is connected before the Lamp Cover is installed, the power will be off and the Lamp Indicator will flash (see page 9).

7.Plug power cord into AC outlet and turn on the main power switch.

120V

Lamp

Temp

Power

NOTE: This product contains lead and a lamp that contains mercury. Dispose of this product and its lamp in accordance with applicable environmental laws. For lamp recycling and disposal information, go to www.lamprecycle.org. For product recycling and disposal information, contact your local government agency or eRecycle.org (in California), the Electronic Industries Alliance at www.eiae.org (in the US) or Electronic Product Stewardship Canada atwww.epsc.ca (in Canada).

For more information, call “1-800-Hitachi”.

Useful Information

91