
AIR-JET Process (continued)
風乾程序(續)
Air-jet Process
風乾方法
Take out the laundries after washing process, rearrange them evenly and put them into the washing basket.
洗衣結束後,取出衣物,理順後將其平整放入洗衣 槽。
•The
最大風乾量為 1.5kg 。
Close the lid, open the inhaling window, and
press the "POWER SWITCH" button .
關閉機蓋,打開吸氣窗,按下電源開關按鈕 。
Attention 注意
•Forget to open the inhaling window may cause insufficient
忘記打開吸氣窗可能導致風乾不充分。
Press the "AIR-JET" button
to set the air- jet duration.
按下『風乾』按鈕
,設定風乾時間。
■The duration is irrelevant to the
Go on with the
因採用定時風乾方式,所以風乾結束時間與風乾程度 無關。衣物的量和種類、氣溫濕度、季節、安裝環境 等因素也可能造成風乾不充分的現象。
若出現風乾不充分,請繼續進行風乾。
•Refer to the following table for approximate
duration. 49
大致的風乾時間參照下表。
49
•The preset during is only for
設定時間僅是風乾的時間,實際運轉時間還要加上理 順衣物和調整衣物平衡的時間,大概要增加 5 至 30 分 鐘。(根據設定時間的變化而改變)。
Operation mode of
風乾程序的運轉方式
Spinningagitating
脫水攪拌
•Please prevent the washing machine from shaking when taking out the laundries. (Water may flow out from the injection opening)
取出衣物時,請勿使洗衣機搖晃。 (水可能會從注入口處流出)
Press the "START" button (The sound of buzzer indicates washing completion)
按下『動』按鈕
(蜂鳴聲響起表示洗衣完畢)
48