Maintenance of nano titanium filter
納米鈦空氣過濾網的維護
1 Open the Inhaling window to 45 (you will feel a click), and remove the deodorization filter net.
45"咔 "
The stains remained on Inhaling window and Inhaling net can be removed with a soft cloth.
Inhaling window | Inhaling net |
Nano titanium filter
Filter net holder
2 If there are stains on nano titanium filter, please remove them with a cleaner.
If there are too stains much, please replace with a new nano titanium filter.
3 Hold the nano titanium filter
and release it from holder (with 6 latches) 6
Use a soft cloth to clean the stains on filter net holder.
Latch Filter net holder
Nano titanium filter
Latch |
4 Install the nano titanium filter onto its holder.
Filter net | Latch |
pins |
Latch |
When installing, insert the nano titanium filter into its holder latches (6 places) and pins
(4 places).
64
5 Install the nano titanium filter onto the Inhaling net.
If nano titanium filter is incorrectly installed, it may reduce the deodorization effect when drying.
6 Close the Inhaling window.
Note
The nano titanium filter assy is a replacable part.
If loss, damage, or severely stains occur, please purchase at service center.
How to maintain the water feed port
A hole has been opened on the water feed port, to prevent water sprinkling when injecting water from water feed port. Stains and detergent may be resided on water feed port over a long period, which may cause bad water outflow, for example, water may overflow from the part other than sprinkling outlet. Be sure to make periodical maintenance.
Water feed port
• Clean the sprinkling opening with toothbrush.
Please unplug the power supply unit during maintenance to prevent accidental hurt.
45
2013/10/15 15:12:32
