Hitachi C 10FCD instruction manual Applications, Preparation Before Operation, Installation

English

APPLICATIONS

Wood, plywood, color board, soft fabric board, hard board similar materials and aluminum sash.

PREPARATION BEFORE OPERATION

Make the following preparations before operating the power tool:

1. Installation

19-1/16" (484 mm)

3/8" (10 mm), 4 Holes

16-27/32" (428 mm)

11-1/2" (292 mm)

5/16" (8 mm) Bolt

Base

5/16" (8 mm) Nut Work Bench

Fig. 4

Attach the power tool to a level, horizontal work bench in accordance with Fig. 4.

Select 5/16" (8 mm) diameter bolts suitable in length for the thickness of the work bench. Bolt length should be at least 2" (50 mm) plus the thickness of the work bench.

For example, use 5/16" (8 mm) ￿ 3" (75 mm) bolts fot a 1" (25 mm) thick work bench.

The extension stay attached to the rear of the base (see Fig. 2) helps stabilize the power tool.

10