English
(4) Setting to cut crown moldings at positions w and e in Fig. 25 (see Fig. 32):
qTurn the table to the left and set the Miter Angle as follows:
*For 45° type crown moldings: 35.3°
*For 38° type crown moldings: 31.6°
wTilt the head to the right and set the Bevel Angle as follows:
*For 45° type crown moldings: 30°
*For 38° type crown moldings: 33.9° ( mark)
ePosition the crown molding so that the lower surface (A in Fig. 24) contacts the fence as in Fig. 33.
Head |
| Head |
|
|
|
| |
Bevel Angle |
| Bevel Angle |
|
Scale |
|
| |
| Scale |
| |
|
|
| |
Fence |
| e | w |
r | q | Fence |
|
Table |
|
| Miter Angle Scale |
Miter Angle Scale | Base | Base | Table |
|
|
| |
Fig. 30 |
|
| Fig. 32 |
Fence |
| Fence |
|
|
|
| |
B | A | A | B |
| |||
Table on Base |
|
| Table on Base |
Fig. 31 |
|
| Fig. 33 |
9. Cutting easily-deformed materials, such as aluminum sash
5mm Clamp Bolt
Vise Assembly
Wood Plate
Aluminum Sash
Wood Plate
Materials such as aluminum sash can easily deform when tightened too much in a vise assembly. This will cause inefficient cutting and possible overload of the motor.
When cutting such materials, use a wood plate to protect the workpiece as shown in Fig. 34.
When cutting aluminum materials, coat the saw blade with cutting oil
Fig. 34
10. How to use the dust bag (Standard accessory)
Blade Guard (Metal)
Dust Bag
Right
Angle
(1)When the dust bag has become full of sawdust, dust will be blown out of the dust bag when the saw blade rotates.
Check the dust bag periodically and empty it before it becomes full.
(2)During bevel and compound cutting, attach the dust bag at a right angle to the base surface as shown in Fig. 35.
CAUTION: Empty the dust bag frequently to prevent the duct and the blade guard (metal) from becoming clogged.
Sawdust will accumulate more quickly than normal during bevel cutting.
Base Surface
Fig. 35 | 19 |
