Hitachi C 10FCD instruction manual Specifications

English

SPECIFICATIONS

Item	Model		C 10FCD
Motor	Type		Series commutator motor
	Power source		Single-phase AC 60Hz
	Voltage (Volts)		115
	Full-load current (Amp)		13
Applicable			Outside Dia. 10" (255 mm)
saw blade			Hole Dia. 5/8" (15.9 mm)
No load speed			3800rpm
		Miter 0°	Max. Height	2-23/32" (69 mm)		*Max. Height 3-1/2" (89 mm)
			Max. Width	5-5/8"	(143 mm)	(*Max. Width 3-5/8" (92 mm) )
	Bevel 0°
		Miter 45°	Max. Height	2-23/32" (69 mm)
			Max. Width	3-7/8"	(98 mm)
		Miter 0°	Max. Height	1-25/32" (45 mm)
Max. sawing			Max. Width	5-5/8"	(143 mm)
	Left
dimensions	Bevel 45°	Miter 45°	Max. Height	1-25/32" (45 mm)
			Max. Width	3-7/8"	(98 mm)
		Miter 0°	Max. Height	15/16"	(24 mm)
			Max. Width	4-3/4"	(120 mm)
	Right
	Bevel 45°	Miter 45°	Max. Height	15/16"	(24 mm)
			Max. Width	3-11/32" (85 mm)
Miter sawing range			Left 0° – 45°, Right 0° – 45°
Bevel sawing range			Left 0° – 45°, Right 0° – 45°
Compound sawing range			Left (Bevel)	0° – 45°, Left and Right (Miter) 0° – 45°
			Right (Bevel) 0° – 45°, Left and Right (Miter) 0° – 45°
Net weight			28.7 lbs. (13 kg)
Cord			2 Conductor type cabtire cable 6.6 ft (2 m)

*Note: 11/16" (17 mm) thick spacer board is required to be attached to the fence.

9