English
4.Securing the workpiece
WARNING: Always clamp or vise to secure the workpiece to the fence; otherwise the workpiece
might be thrust from the table and cause bodily harm.
5. Installing the extension wings (Optional accessory)
The extension wings help keep longer workpieces stable and in place during the cutting operation.
|
| (1) | Insert the 8 mm screw into the hole located on the base. |
|
| (2) | Set the lock support rod under the side of the base. |
Extension |
| (3) | Then with the 8 mm screw for the lock support rod temporary |
Wing |
| ||
|
| stop. | |
|
|
| |
|
| (4) | Insert an extension wing into the two holes of the lock support |
|
|
| rod. |
|
| (5) | Push an extension wing until it contact with the base. |
| Fig. 13 | (6) | Fasten the 8 mm screw and fix an extension wing. |
|
| CAUTION: When transporting or carrying the tool, do not | |
|
|
| |
Extension |
|
| grasp the extension wing. |
Wing |
|
| There is the danger of the extension wing slipping |
|
|
|
out of the base. Grasp the handle (see Fig. 1) instead of the extension wing.
Lock Support
Rod
8 mm Screw
Base
Fig. 14
6. Stock stop for precision cutting (Stock stop is optional accessory)
Extension Wing
Stock Stop
The stock stop facilitates continuous precision cutting in lengths of 10" to
6 mm Wing Bolt
Fig. 15
PRACTICAL APPLICATIONS
WARNING: * To avoid personal injury, never remove or place a workpiece on the table while the tool is being operated.
*Never place your limbs inside of the line next to warning sign while the tool is being operated. This may cause hazardous conditions (see Fig. 16).
Line | Warning Sign | Warning Sign | Line |
|
|
Fig. 16
14
