English
SAW BLADE MOUNTING AND DISMOUNTING
WARNING: To prevent an accident or personal injury, always turn off the trigger switch and disconnect the power plug from the receptacle before removing or installing a saw blade.
1.Mounting the saw blade
(1)Rotate blade guard (plastic), to top position.
(2)Loosen 5 mm screw to free cutter shaft guard.
And rotate cutter shaft guard to the up position as shown in Fig.
(3)Press in spindle lock and loosen bolt with wrench.
Since the bolt is
NOTE: If the spindle lock cannot be easily pressed in to lock the arbor shaft, turn the bolt with wrench while applying pressure on the spindle lock.
The arbor shaft is locked when the spindle lock is pressed inward.
(4) Remove the bolt and arbor collar.
Spindle
Lock
| Fig. |
| |
Saw Blade | Arbor | mm) | |
| Collar | (15.9 | |
Blade Washer | Collar | ||
5/8" | |||
Bolt |
| ||
|
|
Blade Guard (Plastic)
Cutter Shaft
Guard
Tighten
5 mm Screw
Up
Arbor Collar
Arbor Shaft | Loosen |
| |
| Wrench |
| Bolt |
| Saw Blade |
Spot Facing | Fig. |
Fig.
(5) Mount the saw blade.
WARNING: When mounting the saw blade, confirm that the rotation indicator mark on the saw blade and the rotation direction of the blade guard (metal) are properly matched.
(6)Thoroughly clean collar, arbor collar, blade washer (confirm mounting direction) and the bolt, and install them onto the arbor shaft as shown in Fig.
(7)Press in the spindle lock and tighten the bolt by turning it to the left by wrench as indicated in Fig.
CAUTION: * Confirm that the spindle lock has returned to the retract position after installing or removing the saw blade.
*Tighten the bolt so it does not come loose during operation.
Confirm the bolt has been properly tightened before the power tool is started.
(8)Rotate the cutter shaft guard to the initial position and tighten 5 mm screw.
(9)Place blade guard (plastic) in the down position.
20
