WARNING

Be cautious of the power cord connection.

Incorrect connection of the power cord could result in fire or electrical shock.

ξDo not touch the power cord with a wet hand.

ξCheck that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power plug.

ξInsert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.

ξDo not cut off the fitted power plug, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate extension lead or consult your dealer.

ξShould you require replacing the fuse in the molded plug with a new fuse, and then please replace with new one of the same value, type and approval as the original. Ensure the fuse cover is returned to its original position.

Be sure to keep safety ground connection.

Connect the ground terminal of AC inlet of this monitor with the ground terminal provided at the power outlet using the enclosed power cord. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.

Be careful in handling the power cord and external connection cables.

If you keep using a damaged the power cord or cables, it can cause a fire or electrical shock. Do not apply too much heat, pressure or tension to the power cord and cables. If the power cord or cables are damaged (exposed or broken core wires, etc.), contact your dealer.

ξDo not place the monitor or heavy objects on the power cord and cables. Also, do not place a spread, cover, etc, over them because this could result in the inadvertent placing of heavy objects on the concealed power cord or cables.

ξDo not pull the power cord and cables. When connecting and disconnecting the power cord or cables, do it with your hand holding the plug or connector.

ξDo not place the cord near the heater.

ξDo not touch the power plug just after disconnecting it from the power outlet to prevent electric shock.

ξDo not touch the power plug when lightening is close to you.

ξAvoid coiling the power cord and bending it sharply.

ξProtect the power cord from being walked on, pinched particularly at plugs, conveniences receptacles, and the point where they exit from the apparatus.

ξDo not modify the power cord.

Be careful in handling the battery of the remote control.

Incorrect handling of the battery could result in fire or personal injury. The battery may explode if not handled properly.

ξKeep the battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.

ξDo not allow the battery to be exposed to fire or water.

ξAvoid fire or high-temperature environment.

ξDo not hold the battery with metallic tweezers.

ξKeep the battery in a dark, cool and dry place.

ξDo not short circuit the battery.

ξDo not recharge, disassemble or solder the battery.

ξDo not physically impact the battery.

ξUse only the battery specified in the manual of this monitor.

ξMake sure the plus and minus terminals are correctly aligned when loading the battery.

ξIf you observe a leakage of the battery, wipe out the liquid and then replace the battery. If the liquid adheres your body or clothes, rinse well with water.

ξObey the local laws on disposing the battery.

Surely connect the ground wire.

ENGLISH

7

Page 7
Image 7
Hitachi CMP4221 user manual Be cautious of the power cord connection, Be sure to keep safety ground connection