SAFETY INSTRUCTIONS(continued)
CAUTION
Be careful in moving the monitor.
Neglect could result in an injury or damage.
ξDo not move the monitor during use. Before moving, disconnect the power plug and all external connections.
ξYou are advised to move the monitor with two persons.
ξAvoid any impact or shock to the monitor; particularly take care of glass screen.
Do not put anything on top of the monitor.
Placing anything on the monitor could result in loss of balance or falling, and cause an injury or damage. Use special caution in households where children are present.
Avoid a humid or dusty place.
Placing the monitor in a smoke, a highly humid, dusty place, oily soot or corrosive gas could result in fire or electrical shock.
ξDo not place near the kitchen, a humidifier or other place where there is oil, smoke or humidity.
Avoid a high temperature environment.
The heat could have adverse influence on the monitor and other parts, and could result in transformation, melting or fire.
ξDo not place the monitor, the remote control and other parts in direct sunlight or near a hot object such as heater, etc.
ξDo not put the monitor in a place where the temperature is widely changing.
Remove the power cord for complete separation.
ξFor safety purposes, disconnect the power cord if the monitor is not to be used for prolonged periods of time.
Disconnect the
ξ Before cleaning, turn off and unplug the monitor. Neglect could result in fire or electrical shock.plug from the power outlet.
Never remove the back cover of the monitor as this can expose you to very high voltages and other hazards
ξIf the monitor does not operate properly, unplug the monitor and call your authorized dealer or service center.
Prevention of screen burn in
ξContinuous
These servicing instructions are for use by qualified service personnel only
ξTo reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Do not place any objects on top of the monitor
ξThey may fall or cause a child to climb up to retrieve the objects.
PRECAUTIONS
Installation environment
Do not obstruct a ventilation hole.
Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor. Do not put the monitor in the following places.
ξHot places such as near heater, place exposed to the direct rays of the sun.
ξA place where the temperature is widely changing.
ξPlaces with soot, dust or high humidity.
ξPoor air ventilation place.
ξPlace near fire.
ξA wet place such as bathroom, or shower room.
ξPlace where you can trip over it.
ξAlways vibrating or strongly vibrating places.
ξDistorted or unstable places.
How to view the monitor
If you use the monitor in too dark a room, your eyes may become tired.
Please use it in a reasonably bright room.
Avoid direct rays of the sun to the screen in order to prevent eye fatigue.
Your eyes will get fatigued after viewing the monitor for long period of time.
Relax your eyes by viewing away from the monitor from time to time.
Please watch the monitor in downward direction.
Note on image retention
The plasma monitor illuminates phosphor to display images. The phosphor has a finite illumination life. After extended periods of illumination, the brightness of the phosphor will be degraded to such extent that stationary images would
Please refer to the user manual for this model for instruction on how to use these features.
ξEnsure screen saver mode is activated.
ξAlways display the image in a mode that fills the screen.
ξAvoid using split screen mode for long periods of time.
ξDo not allow the “On Screen Display” to stay on for long periods of time.
ξDo not display still images, such as menus from game consoles, T/Text, PCs or logos, on the panel for long periods of time.
ξWe recommend that the “Contrast” and “Brightness” level is reduced as much possible.
How to clean the plasma screen panel of the monitor
Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.
To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.
8
