OPERATING INSTRUCTIONS (continued)
D / N
RECALL button
i + |
| I / II |
MENU |
| A / B2-4-12 |
SELECT buttons |
| P+ |
- | OK | + |
|
| |
|
| P- |
D V D |
|
|
|
| FREEZE |
|
| ZOOM |
MULTI PICTURE button
MULTI MODE button
A/B button
1 2 3
Displaying MULTI PICTURE
4 5 6
If the MULTI PICTURE button on the remote control is pressed, multi pictures will display. And then three types of the screen can be selected by pressing the MULTI MODE button on the remote control.
The multi picture mode will change in the following sequence each time the MULTI MODE button is pressed.
2 pictures (Split) 
4 pictures 
12 pictures
Activating the Split mode from the TV screen
PROGRAM UP/DOWN 
buttons
7 8 9
0
AV1 | AV2 | AV3 | AV4 |
|
| RGB1 | RGB2 |
Pressing the MULTI PICTURE button one time will display 2 pictures.
•The speaker icon can be shifted left and right by pressing the A/B button; the audio will be output from the side on which the speaker icon is located.
•The same signal input cannot be selected for both screens at the same time.
•The TV channel can be changed by pressing the 
and 
PROGRAM UP/DOWN buttons on the remote control.
•The signal input mode of
•Pressing the MULTI PICTURE button once again will cancel the multi picture mode.
•When the Video input is set to RGB Video, multi picture mode is not possible.
•Refer to the table for 2 pictures (Split) mode. 49
Activating the 4 pictures mode from the TV screen
Pressing the MULTI MODE button one time at the 2 pictures mode will display 4 pictures.
•Press [A/B] button to select picture A or picture B indicated by a red triangle. For pictures on right, press
SELECT buttons to select picture. The selected channel number would change green.
•The TV channel can be changed by pressing the 
and 
PROGRAM UP/DOWN buttons on the remote control.
•The audio can only be output from picture A in 4 pictures mode.
•The same signal input mode cannot be selected for each screens at the same time.
•Pressing the MULTI PICTURE button at the 4 picture mode will cancel the multi picture mode. And then, pressing the MULTI PICTURE button again will display the 4 pictures.
•Refer to the table for 4 pictures mode. 49
Activating the 12 pictures mode from the TV screen
Pressing the MULTI MODE button one time at the 4 pictures mode will display 12 pictures.
•Starting from channel 1, preset channels will automatically display in sequence on the 12 windows.
•This function activates only in TV mode.
•After several seconds, it refreshes the picture one by one.
•Pressing the MULTI PICTURE button at the 12 picture mode will cancel the multi picture mode. And then, pressing the MULTI PICTURE button again will display the 12 pictures again.
•Pressing the MULTI MODE button at the 12 picture mode will display the 2 pictures (Split) mode.
5 | AV1 |
AB
AV1 | B1 8 |
AB2 6
B3 11
1 | 2 | 3 | 4 |
5 | 6 | 7 | 8 |
9 | 10 | 11 | 12 |
NOTE
•Even if the input of the horizontal / vertical synchronizing signal (or video signal) stops in the multi picture display, the mode will not change to power save mode.
•Please be careful since image retention will occur if display is left in a multi picture display state for a long period of time.
48
