Basic operations, To project the picture | Hitachi CP-S845W specs

Basic operations

To project the picture

4

3

5

2		2	STANDBY/ON	MUTE
		2	FREEZE
			FREEZE
STANDBY/ON			MAGNIFY VOLUME
			MAGNIFY VOLUME
	INPUT		OFF
	INPUT
MUTE			POSITION ON	LASER
			POSITION ON	LASER
	MENU	7
RESET
			RESET	RIGHT
		7	MENU ON	MOUSE ON
		7	BLANK	TIMER
			BLANK	TIMER
			RGB	VIDEO
			INPUT

ENGLISH

1

1	Turn the MAIN POWER switch of the projector on.[ I : ON]
1	• The ON indicator will light up orange.

2	Press the STANDBY/ON button.
2	• The ON indicator blinks (green) during warm-up and then lights (green).
	• Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
	power is turned off, since the lamp has cooled preparing for next lighting.

3	Remove the lens cap.

4	Adjust picture size using the projection lens ZOOM knob.
5 Adjust focus using the projection lens FOCUS ring.
6	Power on all connected equipment.
6	The method of connecting various equipment, see on the page 20~28.

7	Press the INPUT button or the INPUT SELECT (VIDEO or
	RGB) button to select the source of the signal to be projected
	on the screen.	Example on-screen display
	• The selected signal input is displayed at the bottom right of the screen	Example on-screen display

	for 3 seconds.
			RGB1

13

Image 13

Hitachi CP-S845W specifications Basic operations, To project the picture, On indicator will light up orange, For 3 seconds

Contents

Contents FeaturesOutline Operating Guide About Trademarks Power cord Video signal cablesBefore use Instructions to Users Do not install this unit in an unstable place Do not look directly at the lens when Lamp is litDo not use power supplies other Than that specified If any abnormality occurs Class 2 Laser Product Do not stare directly into the laser aperture Handle the power cord carefully CleaningWhen you are not going to use for a Long time Clean inside the unit at least once two years Volume Do not place this unit where it gets hotCleaning the lens Cleaning the cabinet Names and functions of each part Contents of shipping box AC in socket Remote control sensor Main Power switchVideo input terminal RGB input terminal Remote control transmitter Names and functions of each part How to insert batteries Example of the projector and screen installation InstallationHow to use foot adjusters Basic operations On indicator will light up orangeTo project the picture For 3 seconds Indicator lights up orange To turn off the powerStandby mode PLUG&PLAY Magnifying Function Freeze Function To return to the initial setting Adjustments and functionsMemory function On-screen menus are displayed on the screen How to use the SET UP menu SET UPBar display items VOLUME, Bright etc Numerical display items V POSIT, H Posit etc AUTO-adjustment Confirm Screen AUTO-adjustmentDuring AUTO-adjustment Adjustment Item Details of adjustment Mirror Image The menu Image serves of the picture inversion Connection to the RGB signal terminal Connection to the video signal terminals Resolution Standard Display Dots KHz Example of computer signal Computer/signal Horizontal Timing µs Initial set signalsComputer/signal Vertical Timing lines Horizontal Timing µs Control signal terminal Connection to the control signal terminal ADB Mac mouse PS/2 mouseSerial mouse Control command table Control command tableCommunication RS232C cable Option Command data Procedure of setting the Projector status Procedure of getting the Projector statusProcedure of default setting the Projector status Example of command error Connecting various equipment Example of system setupAC Inlet Computer Note type ComputerDesk type Air filter Filter cover Cleaning the air filterDo not use with removed air filter Loosen two screws and pull the handle to remove Lamp Remove the lamp coverLoosen a screw and remove the cover Reset the lamp time Install the lamp cover and fix it using screwsLamp Malfunctioning Message table Indicator displayOn-screen display Action When you think something wrong Product name Liquid crystal projector Model name CP-S845W Dimension diagramInput terminal Input/Output Terminal