Cleaning the air filter, Air filter Filter cover

Cleaning the air filter

Clean the air filter about every 100 hours.

1 Turn the main power switch off and disconnect the power plug from the power outlet.

2 Remove the front filter cover.

ENGLISH

3	Clean the air filter using a vacuum cleaner.
	• When air filter is very dirty, wash it using neutral detergent diluted with water, and dry well.
4	Attach the air filter on the cover.
	Air filter	Filter cover

Caution

• If air filter is strutted with dust, etc., protection circuit will turn the power off.

•Do not use with removed air filter.

Page 29

Image 29

Hitachi CP-S845W specifications Cleaning the air filter, Air filter Filter cover, Do not use with removed air filter

Contents

Contents FeaturesOutline Operating Guide About Trademarks Power cord Video signal cablesBefore use Instructions to Users Do not install this unit in an unstable place Do not look directly at the lens when Lamp is litDo not use power supplies other Than that specified If any abnormality occurs Class 2 Laser Product Do not stare directly into the laser aperture Handle the power cord carefully CleaningWhen you are not going to use for a Long time Clean inside the unit at least once two years Volume Do not place this unit where it gets hotCleaning the lens Cleaning the cabinet Names and functions of each part Contents of shipping box AC in socket Remote control sensor Main Power switchVideo input terminal RGB input terminal Remote control transmitter Names and functions of each part How to insert batteries How to use foot adjusters InstallationExample of the projector and screen installation Basic operations On indicator will light up orangeTo project the picture For 3 seconds Indicator lights up orange To turn off the powerStandby mode PLUG&PLAY Magnifying Function Freeze Function To return to the initial setting Adjustments and functionsMemory function On-screen menus are displayed on the screen How to use the SET UP menu SET UPBar display items VOLUME, Bright etc Numerical display items V POSIT, H Posit etc AUTO-adjustment Confirm Screen AUTO-adjustmentDuring AUTO-adjustment Adjustment Item Details of adjustment Mirror Image The menu Image serves of the picture inversion Connection to the RGB signal terminal Connection to the video signal terminals Resolution Standard Display Dots KHz Example of computer signal Computer/signal Horizontal Timing µs Initial set signalsComputer/signal Vertical Timing lines Horizontal Timing µs Control signal terminal Connection to the control signal terminal Serial mouse PS/2 mouseADB Mac mouse Control command table Control command tableCommunication RS232C cable Option Command data Procedure of setting the Projector status Procedure of getting the Projector statusProcedure of default setting the Projector status Example of command error Connecting various equipment Example of system setupAC Inlet Computer Note type ComputerDesk type Do not use with removed air filter Cleaning the air filterAir filter Filter cover Loosen a screw and remove the cover Remove the lamp coverLoosen two screws and pull the handle to remove Lamp Reset the lamp time Install the lamp cover and fix it using screwsLamp Malfunctioning Message table Indicator displayOn-screen display Action When you think something wrong Product name Liquid crystal projector Model name CP-S845W Dimension diagramInput terminal Input/Output Terminal

Cleaning the air filter

Clean the air filter using a vacuum cleaner.

Attach the air filter on the cover.

Air filter

Filter cover

•Do not use with removed air filter.