35
TO REPLACE THE INNER GLASS DOORPANEL
1. Holding the glass panel in your right hand full y
open the oven door with your left.
2. Gently ease and push the glass into the loc ation
points under the handle before lowering and
sliding the glass into position under the hinge
location points at the rear.
Ensure the glass is properly located and the text 'This
way up' is facing towards you and at the top edge of
the door.
Do not attempt to use the oven without the
glass being in place.
CLEANING THE GRILL AND OVENFURNITURE
All removable parts, except the grill pan handle ca n
be washed in the dishwasher.
The grill pan, grill pan grid, and oven shelves may be
cleaned using a soap impregnated steel wool pad.
Soaking first in hot soapy water will make cleaning
easier.
REPLACING AN OVEN LIGHT BULB
Disconnect the appliance from the
electricity supply before replacing the bulb.
The type of bulb required is a 300°C 25 watt sm all
Edison Screw.
1. Make sure the appliance is cool before replacing
the bulb.
2. Open the door and remove the shelves and
wirework runners.
3. Pull the glass bulb cover towards you and then
pull it off. If necessary, use a screwdriver to
carefully lever off the cover, taking care not to
damage the oven cavity.
4. Unscrew the bulb by turning it to the left.
5. Fit a new bulb and then replace the glass bulb
cover.
6. Refit the wirework runners and replace the o ven
shelves.
7. Restore the electricity supply and reset the time of
day.