Hitachi List of Adjustments Needed After Replacing Major Components, Unit, Written Disabled *2

Adjustment > List of Adjustment Items

6-3-2 List of Adjustments Needed After Replacing Major Components

	Major Components
Item	MAN-H/MAN circuit board(*1)	MAN-H/MAN circuit board(*1)	EVF	LCD
	(EEPROM backup data already	(EEPROM data backup	unit(*3)	unit
	written)	disabled)(*2)

Initial Data Write

Video Level

Burst Level

Sampling Pulse

Autofocus

Auto Iris Control

Matrix

Chroma Gain

Spot Noise

LCD PLL

LCD Contrast-1(*4)

LCD Bright(*4)

LCD Contrast-2(*4)

LCD White Balance

EVF BL DET Check

EVF PLL

EVF Contrast

EVF Bright

EVF White Balance

*1: Be sure to perform “4-9-2 EEPROM data backup and write” before replacing the MAN-H/MAN circuit board.

*2: “EEPROM data backup disabled” refers to when the backup of EEPROM data from the MAN-H/MAN circuit board to be replaced could not be properly executed due to some fault, such as the DVD video camera/recorder not being turned on, etc.

*3: When replacing the EVF unit, be sure to perform EVF backlight check between the replaced and new EVF units.

*4: The following three items cannot be performed singly. Be sure to perform these adjustments as a set with the three items, and in the order stated:

LCD contrast – 1 LCD bright LCD contrast – 2

6 - 21