Hitachi service manual END of Disc

Troubleshooting > Messages and Troubleshooting

			Message		Cause/condition for	Troubleshooting
					message to appear
Disc is not formatted.					Appears when an unformatted DVD-	When initializing it (deleting all
Format the disc now?					RAM disc or one initialized (other	recorded data), choose “YES” and
	YES			NO	UDF2.0) on PC is loaded.	designate it.
					Also appears if user rejects partial repair	Choose “NO” and designate partial
					or total repair of video file.	repair or total repair. When
						initializing it (deleting all recorded
						data), choose “YES” and designate it.
Disc is not formatted.					Appears when a brand-new DVD-R disc	When recording on the DVD video
If it formats, it becomes					was loaded.	camera/recorder, choose “YES” and
possible to use for camera.						designate it. When recording video
	However, when you record					edited on PC connected via the PC
from PC connection						connection terminal, choose “NO” and
terminal, please do not						designate it.(*4)
format.
	Format
		the disc now?
	YES			NO
Disc overheat.					Appears when the temperature inside	Set the power switch to “POWER
Please retry later.					the DVD video camera/recorder, or the	OFF” with the disc loaded, and then
					temperature of disc, is too high, and	leave the DVD video camera/recorder
					normal operation cannot be executed.	in a well-ventilated place until the
						inside temperature decreases.
DPOF is not set to scene					Appears if “Slide Show: DPOF” is	Specify “Slide Show: All”, or do not
					specified when a card for which DPOF	try slide show.
					has not been set is loaded.
DPOF scenes over limit.					Appears when the number of settable	Release unnecessary DOPF setting
Cannot set DPOF scenes.					scenes for DPOF has exceeded 999.	on photos when newly setting DPOF.
DVD-R Disc, Video mode					Appears if an attempt is made to change	Stop trying to change the Video
cannot be changed.					the Video recording mode of a recorded	recording mode, or replace the disc.
					DVD-R disc. Once even one scene is
					recorded on a DVD-R disc which has
					been initialized, the originally
					designated Video recording mode is
					specified to be maintained until the final
					recording on the disc.
					Also appears after the DVD-R disc has	Operate the DVD video camera/
					been initialized.	recorder after the message
						disappears.
END OF DISC					Appears if the disc recordable capacity	Replace the disc.
					has reached the limit during recording.
End scene cannot be divided.					Appears when the last image of scene	Stop trying to divide a scene.
					was selected to divide the scene: The
					specifications state that dividing a scene
					at its end is not possible.

*4: The purpose of formatting DVD-R disc on the DVD video camera/recorder is to write to disc a program exclusively for camera recording that is necessary to record images shot by camera in real time (increasing the response from disc). When recording images that were edited using PC on DVD-R disc via the PC connection terminal, do not format the disc: The program used exclusively for camera recording will disable normal recording.

4 - 14