Transferring Data to PC

Conditions in which PC connection software can be used:

Windows 98 preinstalled PC

IBM PC/AT compatible PC

Equipped with USB port in standard

CD-ROM or DVD-ROM drive provided

The following hardware requirements are recommended for smooth use:

Pentium II, Pentium III, Celeron with clock frequency 400 MHz or higher

Memory of at least 64 MB

Free space on hard disc: at least 100 MB

The following are stored in the PC connection software CD-ROM:

USB device driver for DVD comcorder

• UDF Reader

Cautions:

No power is supplied to this DVD camcorder via PC connection cable: Use the AC adapter/charger to power the DVD camcorder.

The PC connection cable provided is exclusively for this DVD camcorder. A generally available USB cable cannot be used.

Unplug all cables other than the power cable and USB cable when connecting camcorder to PC.

Do not unplug the PC connection cable when the ACCESS indicator is lit or blinking: Disconnecting it could damage the data on disc.

• And, thoroughly read the instruction manual of PC connection software.

Connect the DVD camcorder to PC at comfortable room temperature: If movies are transferred at ambient temperature of 95˚F (35˚C) or more for an extended time, reading errors could result.

• Hitachi does not guarantee operation in the following cases:

-When using USB port added by installing USB extended board

-When USB hub is used

- When cables other than the cable supplied are used

- When PC equipped with DVD-RAM drive is used (in USB connection)

If you use PC equipped with DVD-RAM drive, change the UDF file system to the UDF device driver contained in the PC connection software.

147

Page 147
Image 147
Hitachi DZMV100A instruction manual 147