Hitachi DZMV100A instruction manual Be careful when removing the DVD-RAM disc

Cautions When Using

Be careful when removing the DVD-RAM disc:

When the DVD camcorder is used for a long period of time, the temperature of DVD- RAM disc will be high: Wait for a few moments before removing the disc after the DVD camcorder is turned off.

Do not turn the DVD camcorder off while the ACCESS indicator is blink- ing:

The ACCESS indicator is blinking to show that data is being written to DVD-RAM disc, or being read from it. Do not do any of the following so as not to dam- age the data:

• Remove battery pack.

• Disconnect AC adapter/charger.

•Plug or unplug PC connection cable.

ACCESS

• Remove DVD-RAM disc.

If the DVD camcorder is turned off while the ACCESS indicator is blinking, turn it on again with the disc car- tridge loaded in the DVD camcorder.

Do not wipe the DVD camcorder case with benzene or thinner:

•The coating of case could peel off or the case could deteriorate.

• When using chemical cleaning cloth, follow the instructions.

Also read the instructions attached with optional accessories:

For optional accessories, follow the cautions and instruction manuals attached.

Use the AC adapter/charger only in a well-ventilated, open space:

Do not use the AC adapter/charger in a narrow space where flow of air is blocked, or where it is very near any object or inside any object: Ignoring this will increase heat inside the AC adapter/charger, which could cause fire, burns, electric shock or fault.

23