Turning DVD Camcorder On

1.While pressing the button at the center of POWER switch, push the switch down.

The red indicator of the button will light.

The DVD camcorder starts to recognize the disc, and after approximately 25 seconds, it will enter the recording pause status.

Basic handling of DVD camcorder

POWER

Viewing Subject through Viewfinder

1.Fully extend the viewfinder.

2.Adjust the angle of viewfinder as you like, and fit your eye to the Eye cup.

Caution

If the LCD monitor is open, the viewfinder will be off.

If the viewfinder is not fully extended, subject image will not be focused.

If the image is blurred:

You can adjust the focus to suit your eyesight. Adjust the diopter control under the Eye cup so that the sub- ject image can be seen clearly.

Eye cup

2

1

Diopter control

59

Page 59
Image 59
Hitachi DZMV100A instruction manual Turning DVD Camcorder On, Viewing Subject through Viewfinder, If the image is blurred