Hitachi DZMV100A instruction manual Recording Stills, Press the Photo button all the way

Recording Stills

1.Turn the DVD camcorder on and set the

RECORDING MODE switch to .

2.Make sure that appears on the monitor screen.

Tip: Still recording mode

•When switched to still recording, the image in the viewfinder or on the LCD screen will be rougher than during movie recording, but this will not affect the recorded image.

Number of recordable stills

3.Check the subject on the screen (viewfinder or LCD), and operate the Zoom lever as needed to adjust the size of subject image.

The zoom operation is the same as when recording a movie. See “Zooming” on page 67. You can also switch off digital zoom (see p. 68).

4. Press the PHOTO button (shutter) half way: The operating sound will be heard twice.

The DVD camcorder automatically focuses on the subject at the center of screen (when auto focus is selected).

5. Press the PHOTO button all the way in.

The screen will dim once( DVD will blink), and then the recorded still will be displayed.

6. When message "DISC ACCESS" disap- pears, recording of still will be complete.

It will take approximately 10 seconds to store the data of one recorded still, after which another still is recordable.

82