Hitachi DZMV100A instruction manual DVD-RAM Discs

Tip:

•The side that will be recorded when SIDE A of disc faces the hand strap is the opposite side to the "SIDE A" indication.

Laser

Surface to be recorded

DVD-RAM Discs

A

side A indication of disc

Cautions:

•When recording special events, be sure to use a new disc which has never been removed from cartridge.

•Most generally available 8 cm DVD-RAM discs can be removed from cartridges if they are for video cameras; However, before removing disc from cartridge, read the instruction sheet provided with the disc or consult the disc maker.

Take care with the following when handling the removed disc:

•Be sure not to touch disc surfaces.

•Be careful not to drop the disc removed from cartridge.

•Be sure not to bend the disc.

•Do not leave the disc outside the cartridge.

•Do not subject the disc to heat.

•Do not write on disc with a ball-point pen or pencil.

•Be sure not to wipe disc surfaces with thinner, water or anti-static agent.

Use dry, soft cloth to lightly wipe off dust or dirt that adheres to the disc. Never use solvents to clean the disc.

•If the disc is removed from cartridge and the data stored by this DVD camcorder is rewritten on devices other than this DVD camcorder, recording or playback may not be normal, or Disc Navigation may not operate normally, when the disc replaced in cartridge is used on this DVD camcorder again.

37