Hitachi DZMV270A Playing Back, Immediately Checking Recorded Scene, Skip Playback

Playing Back

Immediately Checking Recorded Scene

You can check your recording immediately on the spot.

2

Press the button.

Playback will stop, and recording pause status will be restored.

Speaker

buttons

Joystick

button

1 Press button in the recording pause status.

The DVD video camera/recorder will enter the playback mode, and playback will start from the first image of the scene you have recorded last. When playback is finished, the DVD video cam- era/recorder will enter the pause status at the last image on disc.

Note: When the LCD monitor is opened, playback sound will be heard from the speaker. Adjust the sound volume using the volume control buttons ( , ).

Note: To temporarily stop playback, press the button. Press the button again to re- start playback.

Note: Even if you stop playback midway and im- mediately start recording again, the new image will always be r ecorded after previously r ecorded images (these images will not be overwritten).

Note: When playback is finished, the mark will appear at the last image. If the DVD video cam- era/recorder is left without being operated, it will return to the recording pause status after approxi- mately 5 minutes.

Note: If the button is pressed while the mark is being displayed, playback will start fr om the first scene recorded on disc.

Skip Playback

During playback, tilt the joystick upor down to locate the start of desired scene.

	Tilt	once	:To return to the first image of
			the scene being played back,
			and start playback.
	Tilt	once	:To skip to the first image of the
			scene following the one being
			played back, and start playback.
	Tilt	and hold :To continuously locate the be-
			ginnings of scenes, starting
			from the scene preceding the
			scene being played back. When
			the desired image appears, re-
			lease the joystick: Playback will
			start from that point.
	Tilt	and hold:To continuously locate the be-
English
			ginnings of scenes, starting
			from the scene following the

scene being played back. When the desired image appears, re- lease the joystick: Playback will start from that point.

Portion being played back

Tilt up twice Tilt up once Tilt down once Tilt down twice

Scene 1	Scene 2	Scene 3
Portion being played back
Tilt up once	Tilt down once	Tilt down twice
Scene 1	Scene 2	Scene 3

Tilting up the joystick at a portion several seconds from the start of scene being played back will return to the start of the scene preceding that being played back.

Note: If you perform skip playback during play- back pause, the DVD video camera/recorder will enter the playback pause status at the beginning of the located scene.

Note: Tilting downin the last scene on disc will set the DVD video camera/recorder to the play- back pause status at the last image.

Note: If the temperature inside the DVD video camera/recorder is high, it may not operate nor- mally. In such a case, tur n the DVD video cam- era/recorder off, wait for a while, and then turn it on again.

44