Hitachi HDPJ52 user manual Selecting an input signal, Automatically adjusting the picture

HDMI PC AUTO

COMPO S-VIDEO VIDEO

BRIGHT CONTRAST COLOR

COMPO S-VIDEO VIDEO

HDMI PC AUTO

COMPO S-VIDEO VIDEO

HDMI PC AUTO

Selecting an input signal

1. To switch between input ports, press the INPUT button on the projector. Each time the button is pressed, the projector will switch between input ports as follows.

COMPONENT VIDEO  S-VIDEO



HDMI  COMPUTER  VIDEO

1.To select a specific input port directly, press the PC, HDMI, COMPO, S-VIDEO or VIDEO button on the remote control according to which port you want to select.

PC button  COMPUTER port

HDMI button  HDMI port

COMPO button  COMPONENT VIDEO ports

S-VIDEO button  S-VIDEO port

VIDEO button  VIDEO port

POWER LIGHT

BLACK MODE MEMORY

ASPECT IRIS

ENTER

MENU RESET

BRIGHT CONTRAST COLOR

HDMI PC AUTO

COMPO S-VIDEO VIDEO

Projection

STANDBY/ON

POWER TEMP	LAMP	ENGLISH
MENU	ENTER
INPUT	RESET

Automatically adjusting the picture

1. Press the AUTO button on the remote control to automatically set or select the following contents.

POWER LIGHT

BLACK MODE MEMORY

ASPECT IRIS

ENTER

 For a signal from the COMPUTER port MENU RESET

The vertical position, horizontal position, horizontal phase, horizontal size and aspect ratio are

automatically set. Make sure that the application

window is set to its maximum size before attempting to use this feature. A dark picture may be incorrectly adjusted. Use a bright picture when adjusting.

For a signal from the HDMI port The aspect ratio is automatically set.

For a signal from the COMPONENT VIDEO ports

The vertical position, horizontal position and aspect ratio are automatically set. The horizontal phase is also automatically set except for 525i (480i), 625i (576i) and SCART RGB signals.

For a signal from the S-VIDEO or VIDEO port

The video format best suited for the respective input signal will be automatically selected. This function is available only when the VIDEO FORMAT item in the INPUT menu (46) is set to AUTO.

The vertical position, horizontal position and aspect ratio are also automatically set.

NOTE • The automatic adjustment operation takes approximately 10 seconds. Automatic adjustment may not function correctly with some input signals.

21