43
ENGLISH
Advanced Menu (IMAGE menu)
IMAGE menu

The following functions are accessible via the

IMAGE menu. After selecting an item according to

the procedure described in the preceding "Advanced

Menu operation" section (35), refer to the following

table for details on operating the selected item.
Item Description
ASPECT
Using the ▲/▼ cursors buttons changes the aspect ratio.
For a computer (RGB) signal
NORMAL 4:3 16:9
For an HDMI signal
NORMAL 4:3 16:9 WIDE MOVIE1 MOVIE2 14:9
For a video, s-video or component video signal
4:3 16:9 WIDE MOVIE1 MOVIE2 14:9
For no signal or an unrecognized signal
16:9 (fixed)
- NOTE -
• The NORMAL mode uses the signal’s original aspect ratio.
• Performing an automatic adjustment initializes the aspect ratio
setting.
• The ASPECT function can also be accessed using the ASPECT
button on the remote control (24) or via the EASY MENU (31).
OVER SCAN
Using the ▲/▼ cursor buttons adjusts the over-scan ratio.
Large (Reduces the picture) Small (Magnifies the picture)
- NOTE -
• The OVER SCAN function can only be used for video, s-video,
component video or HDMI signals.
• When this adjustment is too large, certain degradation may appear
on the border of the picture. If this occurs, readjust.
• The numbers displayed in the dialog and the IMAGE menu, are
just for your reference, and might not be the exact display ratio.
(Continued on next page)
 MENU [COMPUTER]
 SETUP
 PICTURE
 INPUT
 OPTION
 EASY MENU
 SCREEN
   :SELECT
ASPECT         4:3
OVER SCAN      5
V POSITION     25
H POSITION     142
H PHASE        16
H SIZE         1344
AUTO ADJUST
 IMAGE
4:3
NORMAL
4:3 16:9 WIDE MOVIE1 MOVIE2 14:9
16:9
NORMAL
Example for
a 16:9 signal
Example for
a 4:3 signal