7K200 SATA OEM Specification

Off-line mode: The device executes command completion before executing the specified routine. During execution of the routine the device will not set BSY nor clear DRDY. If the device is in the process of performing its routine and is interrupted by a new command from the host, the device will abort or suspend its routine and service the host within two seconds after receipt of the new command. After servicing the interrupting command, the device will resume its routine automatically or not start its routine depending on the interrupting command.

Captive mode: When executing self-test in captive mode, the device sets BSY to one and executes the specified self-test routine after receipt of the command. At the end of the routine, the device sets the execution result in the Self-test execution status byte and ATA registers as below and executes command completion.

Status

Set ERR to one when self-test has failed

Error

Set ABRT to one when self-test has failed

LBA Mid

Set to F4h when self-test has failed

LBA High

Set to 2Ch when self-test has failed

SMART Selective self-test routine

When the value in the LBA Low register is 4 or 132, the Selective self-test routine shall be performed. This self-test routine shall include the initial tests performed by the Extended self-test routine plus a selectable read scan. The host shall not write the Selective self-test log while the execution of a Selective self-test command is in progress.

The user may choose to do read scan only on specific areas of the media. To do this, user shall set the test spans desired in the Selective self-test log and set the flags in the Feature flags field of the Selective self-test log to indicate do not perform off-line scan. In this case, the test spans defined shall be read scanned in their entirety. The Selective self-test log is updated as the self-test proceeds indicating test progress. When all specified test spans have been completed, the test is terminated and the appropriate self-test execution status is reported in the S.M.A.R.T. READ DATA response depending on the occurrence of errors. The following figure shows an example of a Selective selftest definition with three test spans defined. In this example, the test terminates when all three test spans have been scanned.

Figure 10 Selective self-test test span example

After the scan of the selected spans described above, a user may wish to have the rest of media read scanned as an off-line scan. In this case, the user shall set the flag to enable off-line scan in addition to the other settings. If an error occurs during the scanning of the test spans, the error is reported in the self-test execution status in the S.M.A.R.T. READ DATA response and the off-line scan is not executed. When the test spans defined have been scanned, the device shall then set the offline scan pending and active flags in the Selective self-test log to one, the span under test to a value greater than five, the self-test execution status in the S.M.A.R.T. READ DATA response to 00h, set a value of 03h in the off-line data collection status in the S.M.A.R.T. READ DATA response and shall

143/173

Page 142 Page 144
Page 143
Image 143
Hitachi HDS723020BLA642 manual Status, Error, LBA Mid, LBA High, Smart Selective self-test routine
Page 142 Page 144

HDS723020BLA642 specifications

The Hitachi HDS723020BLA642 is a high-performance hard disk drive that exemplifies the balance between reliability and advanced technology, making it an excellent choice for a range of applications, from desktop computers to enterprise storage solutions. This 2TB SATA hard drive is designed to meet the growing data storage needs of users who demand both speed and efficiency.

One of the key features of the HDS723020BLA642 is its impressive rotational speed of 7200 RPM. This speed facilitates faster data access and improved overall performance, significantly enhancing the user experience during data-intensive operations such as gaming, video editing, and large file transfers. Coupled with a SATA III interface, this drive facilitates data transfer rates of up to 6 Gb/s, providing an efficient conduit for moving data quickly between the hard drive and the motherboard.

The drive comes equipped with a large 64 MB cache, which plays a crucial role in buffering read and write operations. This substantial amount of cache memory allows the drive to temporarily store frequently accessed data, leading to reduced latency and enabling smoother multitasking capabilities. Users will benefit from faster load times and reduced wait periods when working with large files.

Reliability is another defining characteristic of the HDS723020BLA642. Hitachi, now a part of Western Digital, has a longstanding reputation for producing durable hard drives. This model incorporates advanced technologies, such as the Fluid Dynamic Bearing (FDB) for quieter operation and better longevity. The drive also features an enhanced error recovery system that minimizes the risk of data loss, making it a suitable option for both personal and professional use.

In terms of power efficiency, the HDS723020BLA642 is designed to consume less power during operation compared to older hard drive models. This efficiency not only helps in reducing operational costs but also contributes to a longer lifespan for the drive itself.

Overall, the Hitachi HDS723020BLA642 hard drive combines speed, reliability, and efficiency into a compact package, making it an ideal choice for users needing a substantial amount of storage without compromising on performance. Whether for upgrading an existing system or building a new one, this drive offers a blend of technology and durability that caters to modern storage demands.
Top Page Image Contents