Printronix L5035 user manual Standby Clearing Fault

Chapter 6 System Status And Error Messages

Standby ...

Clearing Fault

•If the fault is not cleared:

a.The printer beeps and briefly displays the following message:

Faults Not Cleared

b.The printer then redisplays the original fault message, or any other uncleared fault message.

c.Attempt to clear the fault condition again, or contact your service representative.

•If the fault is cleared, and if you do not need to reload the paper into the tractors (for example, the printer ran out of toner):

a.The printer goes OFFLINE.

b.Press ONLINE to resume printing.

•If the fault is cleared, and if you need to reload paper into the tractors (such as after a paper jam), the following message appears:

Reload Paper

in Tractors

a.Reload the paper onto the tractors.

b.Press CLEAR.

c.Press ONLINE to resume printing. Note that pages have been lost.

•If the fault is cleared, and if you already have reloaded the paper while clearing the fault condition (in Step 2), the following message appears:

214