21
Remove packaging materials carefully and save them. I f the printer
is powered on without removing all internal tape and packin g, the
printer may be damaged.
Keep combustible materials away from the printer. Dispose of used
toner properly, as it is flammable.
Some components in the printer are potentially hazardous. For
example, the fuser unit becomes very hot under normal operatin g
conditions, and several components use high voltag e.
Handle the photoreceptor drum properly, due to the nature of the
material. Do not put used drums in the trash; ship them to the
appropriate disposal facility for recycling. (See page 139.)
Do not block or obstruct any cabinet ventilation slots.
Never spill liquid on or in the printer. Use only approv ed cleaning
agents and methods.
Put nothing on the power cord. Do not locate the power cord where
people will walk on it. Do not place the power cord under any
carpet.
Do not lean on or put heavy objects on top of the printer.
Do not put your hand into the power paper stacker when the printer
is in operation.
Turn off the power immediately if the printer emits an unusual noise
or smell.
Do not look directly at the flash lamp light.