Printronix L5035 user manual Variable Tray Length, Paper Size IPS 12/22 IPS 11/21 IPS 10/20

Paper Control Menu

“Tray Width” here is defined as the edge of the paper parallel to the drum. If the paper tray is set for Letter size or A4 size, the Variable Tray Width setting in the menus must be greater than the length.

Variable Tray Length

With Variable Tray Length, it is possible to override the standard cut sheet paper tray lengths. The standard cut sheet paper sizes are listed in the following table. Using Custom Tray Length and modified paper trays, it is possible to use non-standard paper stock that is a different length than standard paper lengths.

You can independently adjust the lower tray length in the menus. To adjust the width of the bottom tray, select Lower Tray Length from the Variable Length Tray Length menu. The tray length is adjustable from 8.3 inches to 19.6 inches, in 0.1 inch increments.

NOTE: The Variable Tray Length feature requires modified paper trays. Do not change the Variable Tray Length menu settings unless you are using a modified paper tray.

Also, you cannot modify the length for a standard cut sheet tray. The length depends on the cassette paper size and is recognized by the printer using the paper size detector sensors.

The following table lists the standard settings for the cut sheet paper tray. (0 = plastic insert; — = no insert)

Paper Size	IPS 12/22	IPS 11/21	IPS 10/20
Legal	—	0	0
Ledger	0	0	—
A3	0	—	0
B4	0	—	—
Letter	—	0	—
A4	—	—	0
Custom Size	0	0	0
(variable width 7.0 - 12.0 inches,
variable length 8.3 - 19.6 inches)

75