151
5Scheduled
Maintenance
Maintaining Print Quality
To maintain good print quality, clean the printer accordin g to the
schedules and procedures listed in this chapter.
1. Do a General Cleaning. (See page 164.)
2. Clean the main charger, precharger, and transfer charger. For
cleaning instructions, see page 172 for the main charger, an d
page 177 for the precharger and transfer charger.
3. If print quality problems occur, clean the following ar eas (see
page 152 for tool part numbers):
a. Clean the drum with the drum freshener (only when smears
appear on print samples due to the drum).
b. Clean the LED array and the SELFOC® lens (LED print
head) with the Toraysee™ cloth.
c. Clean the fuser cover glass with a razor blade or the cov er
glass scraper.
If the print quality is still poor after cleaning the printer, the chargers
may need to be replaced. Contact your authorized service
representative for further assistance.
NOTE: For replacement intervals, see the maintenance schedul es
that begin on page 155.