Printronix L5035 Factory Settings, Factory and Configuration Parameters Menu Item, Paper Control

Factory Settings

Factory Settings

The configuration defaults set at the factory are listed below. These values are available for loading at any time, and are maintained in the printer until a new configuration is loaded.

Table 1. Factory and Configuration Parameters

Menu Item	Default Value
Paper Control
Image Width	14.6 inches
Form Length	11.0 inches
Paper Length	Auto. Select
Paper Selection	Fanfold
Cut Sheet Output	Face Down
Fanfold Output	Into Stacker
Horizontal Image Shift	0/100 inches
Vertical Image Shift	0/100 inches
Toner	3
Reprint on Fault	Enable
Paper Type	Standard
Burst on Eject	Enable
Cut Sheet Options
Tray Linking	Disable
Variable Upper Tray Width	Disable
Variable Lower Tray Width	Disable
Variable Lower Tray Length	Enable
No Back Feed	Disable

57