Printronix L5035 user manual Selfoc Lens LED Print Head

SELFOC Lens® (LED Print Head)

19.To avoid exposing the drum to light for a prolonged period of time, temporarily pack the drum in its original packaging material, and close the box cover. Set the drum aside for now. (It will be installed in a later step.)

20.Remove the drum auxiliary rod from the drum shaft.

21.Wipe the drum shaft clean with a cloth.

SELFOC Lens® (LED Print Head)

22.Loosen the thumb screw and remove the main charger by pulling it toward you.

2

1

Legend:

1)Thumbscrew

2)Main Charger

23.Clean the developing unit area with a vacuum cleaner and a soft cloth.

CAUTION When wiping the SELFOC lens, do not to apply too much force to the drum surface potential sensor located near the SELFOC lens, as this may cause the sensor to be dislocated. (If this happens, contact your service representative.)

195