Chapter 5 General Cleaning
180
4. Lower the transport unit by turning the green lever on the
transport unit to the left.
Legend:
1) Holding Plate
2) Thumbscrew
3) Green Lever
4) Fuser Unit
5) Thumbscrew (2 places not visible)
5. Loosen the thumbscrews on the right and left fuser unit holding
plates.
6. Grasp the handle and pull out the fuser unit until the second
handle is visible.
7. Grasp the second handle with your other hand and remove the
fuser from the printer.
8. Place the fuser on a clean, flat surface with the cover glass
facing up. Do not scratch or place your hands directly on the
cover glass.
1
2
3
4
5