Printronix L5035 user manual Drum

Installing The Photoreceptor Drum

CAUTION Avoid touching the surface of the drum with your hands, which reduces the life of the drum.

15.Carefully pull the old drum outward along the drum auxiliary rod. Hold the front and back ends when the drum is nearly out of the printer, and remove it with both hands.

1

Legend:

1)Drum

16.Pack the old drum for shipment using the original packaging material, and close the cover of the box.

17.Wipe the drum shaft clean with a cloth.

CAUTION Exposing the drum to light shortens its life. Do not expose the drum to direct sunlight, and install it within five minutes under typical room lighting conditions. When removing the drum from its packaging, do not touch the surface of the drum, because fingerprints and scratches can damage the surface and cause poor print quality.

18.Remove the new photoreceptor drum from its package. Do not discard the packaging material, as it will be needed for future drum disposal.

Note that the ends of the drum are identical; there are no front or back ends. Wipe inside the endcaps of the drum with a cloth to ensure that they are clean.

137