Loading Cut Sheet Pape r (Option)
39
Variable Tray Length If your printer is equipped with the cut sheet paper feed option, it is
possible to override the standard cut sheet paper tray lengths. This
feature is called Custom Tray Length. The standard cut sheet paper
tray sizes are listed in the table on page 37. Using Custom Tr ay
Length and specially modified paper trays, it is possible to use
nonstandard paper stock that is longer or shorter than the standard
paper length. You can use nonstandard length paper only in the
lower tray.
If you are using the Custom Tray Length feature, use the control
panel to adjust the length of the image in the printer to match your
nonstandard length paper from the front panel.
To set a custom tray length, see Cut Sheet Options on the Pape r
Control menu, detailed on page 37.
NOTE: The Custom Tray Length feature requires specially
modified paper trays.
Variable Length feature is enabled when the Variable Tray
Length is enabled, but the values are resumed after the
lower tray has been reconfigured to standard paper si ze.
Paper selection has to be set to the lower tray with a
custom tray inserted in order to make the variable tray
length available through the control panel.