Printronix L5035 user manual Variable Tray Width

Chapter 2 Loading Paper

To clear this message, either add paper to the active tray, or insert a matching tray in the alternate tray position. Then press CLEAR on the control panel.

Tray linking is disabled by the printer automatically when the lower tray is configured as a variable length tray, and is selected as a source tray. Tray linking is resumed after the lower tray is reconfigured to a standard cut sheet paper size.

Variable Tray Width

If your printer is equipped with the cut sheet paper feed option, you can override the standard cut sheet paper tray widths with a feature called Custom Tray Width. The standard cut sheet paper tray sizes are listed in the table on page 37. Using Custom Tray Width and specially-modified paper trays, it is possible to use nonstandard paper stock that is wider or narrower than the standard paper widths.

If you are using the Custom Tray Width feature, use the control panel to adjust the width of the image in the printer to match your nonstandard width paper.

To set a custom tray width, see Cut Sheet Options on the Paper Control menu, on page 69.

NOTE: The Custom Tray Width feature requires specially modified paper trays.

Variable Width is enabled, but the values are resumed after the lower tray has been reconfigured to standard paper size.

Paper selection has to be set to the lower tray with a custom tray inserted in order to make the variable tray width available through the control panel.

38