Printronix L5035 Printer Configuration Horizontal Image Shift, Vertical Image Shift, Toner

Chapter 3 Printer Configuration

Horizontal Image Shift

Horizontal Image Shift specifies the amount to shift an image to the right for precise positioning on the page. The actual width of the image is not affected. The allowable range is -1.0 to 1.0 inches, in 1/100 inch increments. The default is 0.0 inches.

Vertical Image Shift

Vertical Image Shift specifies the amount to shift an image down for precise positioning on the page. The actual height of the image is not affected. The allowable range is -1.0 to 1.0 inches, in 1/100 inch increments. The default is 0.0 inches.

Toner

The Toner option sets the frequency interval for dispensing toner. The higher the number selected, the less frequently toner is dispensed. The allowable range is from 1 to 254. The default is 3.

Reprint on Fault

Reprint on Fault enables (default) or disables automatic reprinting after a fault condition occurs. If Confirm is selected, the printer returns a message asking if you want to reprint.

Paper Type

Paper Type allows you to set the printer for either standard or synthetic paper. The default is Standard; use this setting for most types of media. Use the Synthetic setting for special types of media such as plastic cards.

Burst on Eject

Burst on Eject allows you to use roll-feed paper that cannot be cut (separated) or parked (backed out of the print engine).

•With fanfold paper, whenever you change the page size or press the PAGE EJECT key, the printer automatically separates the currently loaded paper at the perforation, and backs the unprinted paper out of the engine.

72