Printronix L5035 user manual Mode Menu, Printer Configuration No Back Feed

Chapter 3 Printer Configuration

No Back Feed

No Back Feed automatically disables (default) or enables back feeds.

Mode Menu

Mode

LinePrinter+

A

PCL5

B

IGP/PGL

C

IGP/VGL

D

IPDS

E

See also the following documents:

A. LinePrinter Plus Emulation for LaserLine Printers Programmer’s Reference Manual B. PhoenixPage PCL5 Emulation Operator’s Guide

C. IGP/PGL Emulation for LaserLine Printers Programmer’s Reference Manual D. IGP/VGL Emulation for LaserLine Printers Programmer’s Reference Manual E. IPDS Emulation for LaserLine Printers Programmer’s Reference Manual

NOTE: The order and number of options displayed in this menu structure varies depending on the emulations that are installed.

“Mode” refers to the emulation software that you use. Your printer comes equipped with the Printronix LinePrinter Plus emulation software (which emulates an impact printer). The IGP/PGL, IGP/ VGL, IPDS, and PhoenixPage PCL5 software emulations are available as options.

When you turn on the printer, it reads the Flash memory as part of its initialization, to determine what emulations are installed.

Based on this information, the printer then creates the appropriate selections on the Mode menu. During power-up, the printer also loads the power-up set of configuration values. The power-up set is the same as the factory set until you save a new set to the power- up configuration.

76