
5.
6.Click the Driver tab and click Update Driver.
7.Select Install from a list or specific location (Advanced) and click Next.
8.Click Browse, and browse to the location to which you previously extracted the driver files.
9.When the name of the appropriate driver appears, click Next.
10.Click Finish and restart your computer.
Using the Windows XP Device Driver Rollback
If you install a new device driver that causes system instability, you can use the Windows XP Device Driver Rollback to replace the new device driver with the previously installed version of the device driver. If you cannot reinstall your previous driver by using the Device Driver Rollback process, then use System Restore to return your operating system to its previous operating state before you installed the new device driver. To use Device Driver Rollback:
1.Click the Start button and
2.Click Properties.
3.Click the Hardware tab and click Device Manager.
4.In the Device Manager window,
5.Click the Drivers tab.
6.Click Roll Back Driver.
Manually Reinstalling Drivers for Windows 2000
NOTE: If you are reinstalling an infrared driver, you must first enable the infrared sensor in the system setup program before continuing with the driver installation.
1.After extracting the driver files to your hard drive as described previously, click the Start button, point to Settings, and then click Control Panel.
2.
3.Click the Hardware tab.
4.Click Device Manager.
5.
6.
7.Click the Driver tab and click Update Driver.
8.Click Next.
9.Ensure that Search for a suitable driver for my device (recommended) is selected, and then click Next.
10.Ensure that the Specify a location check box is checked and that all other check boxes are unchecked, and click Next.
11.Click Browse to browse to the location to which you previously extracted the driver files.
12.When the name of the appropriate driver appears, click Next.
13.Click Finish and restart your computer.