1 
device latch release
4. Pull the device by the latch release to remove the device from the module bay.
5.Insert the new device into the bay, push the device until you feel a click, and push the device latch release in so that it is flush with the computer.
6.When the operating system recognizes the new device, click Close.
If the Device Screw Is Installed
Windows XP
1.
2.Click the device you want to eject.
3.If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.
4. Use a #1 Phillips screwdriver to remove the device screw from the bottom of the computer.
