The computer recognizes most PC Cards and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD that came with the PC Card.
Removing a PC Card or Blank
NOTICE: Before you remove a PC Card from the computer, click the icon on the taskbar to select a card and stop it from functioning. If you do not stop the card in the configuration utility, you could lose data. Do not attempt to eject a card by pulling its cable, if one is attached.
1. Press the eject button.
1 | eject button |
|
|
2.Push the eject button a second time.
3.Gently remove the card or blank.
1eject button
2PC Card
Save a blank for use when no PC Card is installed in a slot. Blanks protect unused slots from dust and other particles.