Meridian Audio G61 manual Standard parameters, D S P p r e s e t s, Parameter, Range, Default

3 4

D S P p r e s e t s

Standard parameters

All DSP presets (except Mono and Direct) provide the following standard parameters.

Individual DSP presets provide additional parameters, to allow you to adjust specific features provided by that preset. For full details refer to information about each preset later in this chapter.

Parameter	Range	Default	What it changes
Treble*	-10dB to +10dB	+0dB	The slope of the frequency response.
Bass*	-5dB to +5dB	+0dB	The bass response.
Phase*	+ or -	+	The phase of all loudspeakers.
Axis†	-2 to +3	-1	The vertical balance.
Balance	<10 to 10>	<0>	The L-R balance.
HS Output?*	Y or N	Y	Select Y for high-rate audio, upsampled if necessary. Select N for
			standard-rate audio, downsampled if necessary.
Centre	-3.0dB to +3.0dB	+0.0dB	The level of the centre.
Depth	-2.5ms to +5.0ms	+0.0ms	The delay of the centre.
Rear	-30dB to +10dB	+0dB	The level of the rears.
Sides	-30dB to +10dB	+0dB	The level of the sides.
R Delay	0ms to 30ms	Varies	The delay of the rears.
S Delay	0ms to 30ms	Varies	The delay of the sides.
LipSync	0ms to 30ms	0ms	The sync. delay.

*These parameters apply to all DSP presets.

†Axis is only available with Meridian DSP loudspeakers.